30S to 75S BMS with 100A Current high voltage BMS support CAN RS485 Communication for energy storage solar power ,UPS ,Electric grid Back up Power system

$1,054.00

Introductions :

This Integrated BMS was built with? main control board, BMU sampling board, high voltage board, switching power supply, Hall sensor, DC contactor, microswitch, power terminal, structural box and wiring harness, etc.; the characteristic is that the main control board Integrate with sampling board and other power devices to keep the system as a secondary architecture. It has the characteristics of compact structure, flexible installation and low cost, and is suitable for integrated installation with small capacity batteries. The BMS integrated machine component is mainly suitable for the charge and discharge management of lithium iron phosphate batteries (LFP). If you need to modify the parameters with other batteries,please contact our company for parameters setting in according to your battery.

  • Each 15 strings is a battery collection unit, and 75 series batteries have 5 acquisition units.
  • 15 probes for every 15 strings, for a total of 15
  • current collection uses Hall sensor, safe and reliable, no heat;
  • SOC estimation error ?? 5%;
  • 3-digit address dialing to set the BMS address;
  • 3-channel relay dry contact output;
  • 4-channel contactor expansion and auxiliary contact detection;
  • Support for parallel use (maximum 7 units)??
SKU: SP04S028-1

Description

Introductions :

This Integrated BMS was built with? main control board, BMU sampling board, high voltage board, switching power supply, Hall sensor, DC contactor, microswitch, power terminal, structural box and wiring harness, etc.; the characteristic is that the main control board Integrate with sampling board and other power devices to keep the system as a secondary architecture. It has the characteristics of compact structure, flexible installation and low cost, and is suitable for integrated installation with small capacity batteries. The BMS integrated machine component is mainly suitable for the charge and discharge management of lithium iron phosphate batteries (LFP). If you need to modify the parameters with other batteries,please contact our company for parameters setting in according to your battery.

  • Each 15 strings is a battery collection unit, and 75 series batteries have 5 acquisition units.
  • 15 probes for every 15 strings, for a total of 15
  • current collection uses Hall sensor, safe and reliable, no heat;
  • SOC estimation error ?? 5%;
  • 3-digit address dialing to set the BMS address;
  • 3-channel relay dry contact output;
  • 4-channel contactor expansion and auxiliary contact detection;
  • Support for parallel use (maximum 7 units)??


Application scenario:

This BMS can be widely applied on this below filed : Household energy storage ,Island Off-grid energy storage ,Micro-grid energy Storage ,UPS power supplier , Power system

220V DC power supply ,support 96V~240V Lifepo4? 30S to 75S Battery System .

Specification Reference :


Operation voltage range :120V~370VDC? ?Start Mode : DC Start

Balance :? Passive? resistor Balance ,? Balance current :100mA ?? 10mA ( single cell voltage reached 3.5V , sampling precision???? 2??

Communication : CAN :1 channel (communication with PCs /UPS)? RS485:?1 channel ( communication with Host server?/ PCS / UPS)

Display Mode :6-digit LED indicator, including 1-bit fault indication, 1-bit operation indication,4-bit SOC power indication

Rated? Constant current : 50A or 100A ( Client can select it based on your demand )

Short circuit :?7.5KA 20ms Support 7.5KA

Max Overload capacity : 50A Constant / 70A peak with 10S? ,?100A Constant / 150A peak with 10S

Alarm Level : 1 Level.? Protection Level ??two levels??Level 1 cut off charge / discharge?? Level 2 micro cut-off switch, system power down

Weight :5.0KG

Withstand voltage rating??1800VDC 1mA 1min

Operating temperature????20??60??

Works Operation :

Startup process

Make the BMS in the shutdown state and complete the connection with the BMS. After the BMS is assembled, turn the micro disconnect switch on the chassis to “on”, then press the start button (DC start), and the BMS will enter the self-test.If the self-test is normal, you can hear the sound of the contactor closing, the green light on the chassis is on for a long time (it will flash if there is external communication), and the start is completed.

Shutdown/transport status

After the system starts and starts normally, turn the micro disconnect switch to “off” to turn the BMS into shutdown / transport status. If the BMS is not usedfor a long time, the BMS must be in this state.

Working State:

After the BMS is started, the power supply of the BMS is detected and it starts to work normally. Otherwise, it will automatically go to sleep.

Transaction terms :
1) Shipment time : once received your order ,we will proceed it quickly within 3~4 working days without problems .order can be cancled within these days ,otherwise we will reject to cancle the order ,because our items can not get back when in the process of shipment . we will inform our buyer if? there is a stock problems with the order and arrange a properly agreenment on the shipment schedule by email .

2) Shipment Methods : Client can choose suitable shipment methods based on your demand ,Post air parcel service or Express service , we will ship all orders strictly in according to the selected shipment methods by our customer . normally , Post parcel shipment time takes 7~60days depends on different countries serivce . and express takes 2~15days to the destination normally .

3) About Tracking number : Tracking number will be uploaded and will be informed by the registered email on each Friday ,please pay attention to your email later on for the tracking number update .

4) Quality Service : we will take a full responsibility for any defect product caused by our design and production problems ,warranty time is 12 months since the shipment date . but for any defect product caused by any wrong or slavery application from?customers . we will not take the responsibility for that , because for this BMS product ,it do need some skills to make installation . please consult us in advance if you are not clearly with bms connection in the hope of avoid any mistakes of connection . if Buyer damaged the BMS , we can offer the free repairing service to our client , but client should take care of shipment cost .please know it kindly in advance . thanks

Please send email to this address for any questions?james@lithiumbatterypcb.com, we will give you reply within 12hours without problems .

Additional information

WeightN/A
Specification selection

30S Lifepo4 100A, 36S Lifepo4 100A, 38S Lifepo4 100A, 40S Lifepo4 100A, 60S Lifepo4 100A, 65S Lifepo4 100A, 70S Lifepo4 100A, 75S Lifepo4 100A, Other Series and battery type please contact us