600W or 800W Li ion or Lifepo4 Battery charger 12.6V 16.8V 14.6V 14.5V with 25A current 25.2V 29.4V 29.2V at 18A current 42V 43.8V 13A 60V 72V Charger

$106.00$108.00

This high quality alloy type charger has such characteristic as belowing? :
1. Application : For 3S~24S Li ion or Lifepo4 Battery charger? with 5A~25A constant Charge? current
2. Support customized charge voltage and current :client can leave a message with your order for the customized voltage? and current ,voltage selection scope 12V~120V and current should be as below within what I listed Scope ,by selecting ?? Customized voltage and current ?? from the specification drop list for the order placement .
(Please just leave message with your order or to this email :james@lithiumbatterypcb.com? and send it by email like this example will be ok for us to prepare your order : Output voltage ? V and output current ?A ,DC output Connector can take reference to my? below posted connector list )
3.AC power :100V~132V or 200V~240V ( AC plug will be shipped in according to client??s country demand based ib shipping address ,if you want to change the AC plug , please leave message to us )
4.Dimension :170*90*63mm
5. Weight :2.0kg
SKU: LLT-FE600W Category:

Description

This high quality alloy type charger has such characteristic as belowing? :
1. Application : For 3S~24S Li ion or Lifepo4 Battery charger? with 5A~25A constant Charge? current
2. Support customized charge voltage and current :client can leave a message with your order for the customized voltage? and current ,voltage selection scope 12V~120V and current should be as below within what I listed Scope ,by selecting ?? Customized voltage and current ?? from the specification drop list for the order placement .
(Please just leave message with your order or to this email :james@lithiumbatterypcb.com? and send it by email like this example will be ok for us to prepare your order : Output voltage ? V and output current ?A ,DC output Connector can take reference to my? below posted connector list )

2.AC power :100V~132V or 200V~240V ( AC plug will be shipped in according to client??s country demand based ib shipping address ,if you want to change the AC plug , please leave message to us )
4.Dimension :170*90*63mm
5. Weight :2.0kg
6.short-circuit protection,charger o/p current automatically when short-circuit.
7.overload protection:charger o/p current limited automatically when overload.
8.reverse polarity protection:it will shut down when the wire is connected,charge DC fuse or remove the fault.
9.2-stages charging mode: CC(constant current), CV(constant voltage) .
10.Excellent fan cooling technology enable your charger get away from any potential over-heating risk and make your charger??11.Charging state:two LED display.
12.Fuses works to provide double protection from any external damages
13.All kinds of production has passed the CE certification.
14.Automatically cut-off : the charger cut-off automatically when the battery was fully charged ,
15.Efficiency: ??96 %( full capacity)
Photo-Display
B
C
Dcharger-Mode-boarder
charge-mode
Operation-Instructions-Border
1.To check if your local power supply conformsto charger input voltage 110 or 230V,then connect the charger system to a wall socket , if charger
has switched to OFF position ,it must be set to ON status .
2.LED1 (RED ) confirms AC power on an LED2 Green confirms if the charger connects well or not
3.Connect the plug or the DC output cord to battery terminals ,it indicates the charger is charging the battery when the red light turns on ,and
the battery will be fully charged when the battery was charged fully .
Notes : if the charger with a Relay for reverse polarity prouction , it does not have output voltage and current when the Charger AC power on
but disconnecting with the battery , it will have voltage an current output when it connects with battery , if the charger has a fuse instea of Relay
for reverse polarity protection , it has output once AC power on .
Precautions
1. the phenomenon of sparking is normal when it connects to the battery because of high current
2. This charger is designed for charging lithium tupe batteries only
3. Avoid charging the wrong type battery
4. Always place the charger in well-ventilated and dry environments
5. The charger is designed with aluminum case as its heat sink , do not cover it to avoid the case from being overheated while charging
6. Do not disassemble charger ,take it to qualified service person when service or repair is required
Packlist-mode
Pack-list-of-charger
packageshipment
1. Orders processed timely after the payment verification.
2. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address.
3. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
4. Due to stock status and time differences, we will choose to ship your item from our first available warehouse for fast delivery.
5. Delivery time depends on destination and other factors, If you don`t receive the item after 20 days, please contact us, We will track.

Additional information

WeightN/A
Specification selection

3S Li ion 12.6V 25A, 4S Lifepo4 14.6V 25A, 4S Li ion 16.8V 25A, 5S Li ion 21V 18A, 5S Lifepo4 18.3V 25A, 6S Li ion 25.2V 18A, 6S Lifepo4 21.9V 18A, 7S Li ion 29.4V 18A, 8S Lifepo4 29.2V 18A, 8S Li ion 33.6V 18A, 10S Li ion 42V 12A, 12S Lifepo4 43.8V 12A, 12S Li ion 50.4V 10A, 13S Li ion 54.6V 10A, 14S Li ion 58.8V 10A, 15S Lifepo4 54.8V 10A, 15S Li ion 63V 10A, 16S Li ion 67.2V 10A, 16S Lifepo4 58.4V 10A, 17S Li ion 71.4V 10A, 17S Lifepo4 62V 10A, 18S Li ion 75.6V 10A, 20S Li ion 84V 8A, 20S Lifepo4 73V 10A, 21S li ion 88.2V 8A, 22S Li ion 92.4V 8A, 23S Li ion 96.6V 5A, 24S Li ion 100.8V 5A, 24S Lifepo4 87.6V 8A, Customized voltage and value